|
QUIMIGRES
|
|
Tiles and special pieces (finishes) of antacid industrial porcelain clay, with very low water absorption (0.1%) and a very high mechanical resistance (see laboratory sheet) N/mm² flexion), which comply entirely with all EU and American norms and requirements (ASTM). Provided with a "Milan tail" grip which allows a perfect anchoring to any type of mortar or putty filler used in laying. Standard pieces available. Tile Bull Nose Skirting Interior corner Exterior corner Colours: Beige/White Areas of use: Any paving with high chemical resistance demands (all concentrated acids, except FH) alkalis, etc. and at any temperature.Areas with high cleaning demands and a lot of mechanical activity (vegetable, marine, meat, canning, dairies, wine, citric, cava bottlers, the chemical, metallurgy, galvanic industries, water treatment, etc.)
|
|
Modified epoxy resins valid for anti-corrosive sealing of joints between clay tiles, providing a leak proof seal with its high adherence to ceramic and true flexibility. We have two types of epoxy resin available for sealing: QUIMIPOX-LGM Cleanable during application with cleaning
agent QUIMINET. Colours: Fly's wing (anthracite grey) in three tones and natural colour. Other colours upon request. Areas of use: For making joints or seals in pavements, walls, gutters, doorways and swimming pools, covered with antacid ceramic clay.
|
|
Furan resin used for antacid sealing of joints in clay pavements that have to suffer extreme aggression from oxidised or organic concentrated acids. Excellent resistance at a temperature of 180ºC. Can be used equally as a setting putty for ceramics under constant chemical attack. Colours: Black. Areas of use: Sealing resin or setting putty for clay tiles in the chemical and pharmaceutical industries, retention ponds, gutters, etc.
|
|
Vinilester resins used for the anti-corrosive sealing of joints in
clay pavements. Has a high and ample resistance to acids, alkalis and
a great number of solvents. Colours: Fly's wing (anthracite grey) in three tones and natural colour. Other colours upon request. Areas of use: For making joints or seals in pavements, walls, gutters, doorways and swimming pools, covered with antacid ceramic clay.
|
|
Solvent-free anti-corrosive epoxy mortar with three components for
sealing tiles and special antacid clay pieces where a greater security
is required in the system (Loads or constant contact of corrosive solutions
with the pavement). Colours: Sand Areas of use: Ceramic pavements installed in zones with high chemical and mechanical demands, on metal supports, and in gutters, doorways, deposits, treatment pools, etc.
|
|
High adhesive power putty cement, for setting tiles and special antacid clay pieces in cases where the setting of the ceramic is not very thick, especially in vertical surfaces. Colours: Grey. Areas of use: In pavements and walls where there is not much space for the setting material.
|
|
QUIMIJUNT is a hydraulic mortar made of modified cement with synthetic resins formulated especially for sealing joints in general recovering of ceramics, either interior or exterior, due to its good adherence to ceramics, impermeability, elasticity, resistance to cold and pleasing aesthetic effect. Colours: Standard : See BETONPRESS card (35 colours) Areas of use: Swimming pools, facades, interior and exterior paving, decorative murals and walls.
|
